after a single clamping process at the gantry machining center, the commonly used digital control system can control the machine tool according to different processes
after a single clamping process, the commonly used digital control system in the gantry machining center can control the machine tool to automatically select and replace cutting tools according to different processes, automatically change the spindle speed, feed rate, and the motion trajectory of the cutting tools relative to the workpiece, as well as other auxiliary functions. then, multiple processes are completed on several surfaces of the workpiece in sequence. below is an introduction to the process of the gantry machining center for everyone< br/>
due to the concentration of processes and automatic tool changing, the gantry machining center reduces the time for workpiece clamping, measurement, and machine tool adjustment. only in this way can the cutting time of the machine tool reach about 80% of the machine tool's operating time; at the same time, it also reduces the turnover, handling, and storage time of workpieces between processes, shortens the production cycle, and has significant economic benefits. of course, it is now suitable for small and medium-sized batch production with complex part shapes, high precision requirements, and frequent product replacement. in fact, gantry machining centers are mainly based on the development trend of cnc lathes. the difference between cnc lathes and cnc lathes lies in the ability of cnc machining centers to automatically exchange cnc blades for production and processing. according to the different main purposes, cnc blades are installed on the cnc blades. in this way, the production and processing of the cnc blades on the main bearing can be replaced and clamped once according to the fully automatic tool changing equipment, thereby maintaining various production and processing functions. the gantry machining center can produce simple curved surfaces that are difficult to produce and process in a basic way, and even produce and process some production and processing positions that cannot be observed< br/>
the longmen machining center has the characteristics of stable quality, high production and processing accuracy, and high repeatability, and has been included in the production and processing regulations for four axis aircraft. especially now, the total number of work clothes has also decreased, and the production and processing of complex parts do not require complex work clothes. if you want to change the appearance and specifications of the parts, you only need to change the machining program of the parts, which is suitable for new product development and civilian use. in addition, the longmen machining center can also have high productivity under conditions of multi variety, small batch, and large-scale production, reducing the time for production site management, cnc lathe adjustment, and process flow inspection, and reducing drilling time due to the application of drilling volume. it is a cnc machine tool with cnc blades, which can automatically replace cnc blades and produce and process various steel parts within a certain range. some parts of this product have very little demand, but it is a key component that requires high precision and short construction period. traditional processes require multiple machine tools to work in coordination, resulting in long cycles and low efficiency. in the long process flow, it is easy to produce waste under human influence, causing significant economic losses. the gantry machining center is used for processing, and production is completely controlled by the program, avoiding long process flows.
