after completing daily work, the operator can use a vacuum cleaner to clean the waste debris on the rotor end of the spindle motor and the motor wiring terminals, which can prevent waste debris from entering the bearings, accelerate the wear of high-speed bearings, and also prevent waste debris from entering the wiring terminals to avoid short circuits and burning of the motor.
1. cleaning of machine tool debris
after completing daily work, the operator uses a vacuum cleaner to clean the debris on the rotor end and motor wiring terminals of the spindle motor, which can prevent debris from entering the bearings and accelerate the wear of high-speed bearings. it can also prevent waste from entering the wiring terminals, so as not to cause the motor to short-circuit and burn out< br/>
2. key points of knife operation
operators must clean the cutting tools, clamps, and pressure caps thoroughly when cutting. developing this good habit can greatly extend the service life of the spindle motor< br/>
3. check if the water pump is working properly
after starting up every day, the operator must check the working status of the cooling water flow of the motor. because if there is a dead bend in the water pipe, causing poor water flow or dirt blocking the pipeline, it will cause the spindle motor to malfunction and affect the processing effect< br/>
4. work after unloading
after unloading the blade, clean the card head and pressure cap thoroughly< br/>
5. replacing cutting tools
the operator must unscrew the pressure cap clamp head, and during each card installation and tool replacement, the method of directly inserting and pulling the tool cannot be used to change the tool< br/>
6. cleaning of spindle motor
for the spindle motor, its maintenance and upkeep should be implemented in a practical manner, which is to cultivate a "; as soon as you finish your work, you need to clean the spindle motor; habits< br/>
of course, there is still a lot of knowledge about the maintenance of cnc precision carving machines. to ensure the normal operation and longer lifespan of the precision carving machine, it is necessary to learn more maintenance methods. if you encounter a problem that you cannot solve on your own, the best way is to contact the after-sales service personnel of the precision carving machine manufacturer and ask them to send someone to solve it< br/>
